Fan Clutch Wrench 36mm & 48mm – 95210



Works with most gas and diesel viscous fan clutches, with either a 36mm or 48mm hex holding the viscous fan clutch to the water pump. Two wrenches are needed to perform removal and replacement of the viscous fan clutch.  One wrench to hold the water pump stationary (depending on the application a 99800A, 61600, 61500B, 10800 or 10900 ) and the other wrench a 95210 to remove and replace the viscous fan clutch.


61600 + 95210

CHRYSLER, FORD, GM, LAND ROVER, MAZDA (except Ford 4.9L 6 cylinder engines, “Bolted on” water pump pulleys.

99800A + 95210 CHRYSLER, GM LATE MODEL GAS ENGINES “Pressed on”water pump pulleys.

61500B + 95210 GM LATE MODEL DIESEL ENGINES GM 6.5L diesels 2000-2001, GM / ISUZU DURAMAX 6.6L 2001-2005 and new straight pin slot fan hub 2006 and later. “Pressed on” water pump pulleys.

10800 + 95210 CHRYSLER, DODGE, JEEP 5.7L Hemi Truck Engines 2009 and later “Pressed on”water pump pulleys.

Additional information

Weight 2 lbs
Dimensions 8 × 8 × 8 in